Assembly - Ryobi HPL51K Operator's Manual

UNPACKING
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Planer
Blades (2)
Blade Wrench
Edge/Rabbet Guide
Dust Bag
Case
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate
this tool until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.

ASSEMBLY

EXHAUST PORT
ATTACHING THE DUST BAG
See Figure 2.
 Unplug the planer.
 Slide the collar of the dust bag onto the exhaust port.
NOTE: To remove the dust bag, pull it straight out of the
exhaust port.
CAUTION:
The dust bag fills quickly. Empty it often to prevent dam-
age to the product.
9
COLLAR
DUST BAG
Fig. 2