HP VS80 - StorageWorks DLT VS 80 Tape Drive User Manual page 53

unix sco frequently asked questions
data protection
drivers FAQs
windows NT
netware
unix - SCO
unix - linux
file:///C|/Documents%20and%20Settings/topher.COL-SPRINGS/Desktop/dltvs80%20manual/document/common/drivers_faqs/eng/us_q4.htm [11/29/2001 8:35:09 AM]
http://www.hp.com/support/tape may have a later version
frequently asked questions
"Are there any important points I need to be aware of when
changing drivers in my system?"
contents of this section
multiple instances of the same
adaptor
noting the bios information
This topic is available in English only
multiple instances of the same adaptor
You need to be especially careful about having multiple instances of the same
adaptor present in the system. For example, if you have an onboard Adaptec 78xx
chipset and then add a 2940UW PCI card then the OS will number the onboard
chipset at adaptor number 0 and the PCI card at number 1. This holds for given
families, so for example, if you had the previous configuration and added in a
Symbios PCI board, it would then, by slha, instance 0 (as there are no other
Symbios boards present already).
noting the bios information
The easiest way to clarify the configuration is to reboot the system a couple of
times so that you can note down the BIOS information as it is printed out.
next question
Go to the next question
Software, or the SCO in-built backup applet?"
related topics
"Why does my device not work correctly with ISV Backup
hp learning products
back to list of questions
previous question
next question
© 1999-2001, Hewlett-Packard Company