HP VS80 - StorageWorks DLT VS 80 Tape Drive User Manual page 26

unix configuration guide
UNIX configuration
introduction
hp systems
compaq systems
ibm RS/6000 systems
pc based UNIX systems
silicon graphics
sun systems
verify installation
UNIX glossary
file:///C|/Documents%20and%20Settings/topher.COL-SPRINGS/Desktop/dltvs80%20manual/document/common/unix/reseller/eng/c_intro.htm [11/29/2001 8:34:19 AM]
This topic is available in English only. Click in the top right-hand corner to
close the window and return to the tape drive user's guide.
hp
pc based
UNIX
This guide provides basic information on configuring HP tape drives with various
operating systems. The table below lists the models for which this information is
appropriate.
Model
HP Surestore Ultrium drive
Ultrium 230
HP Surestore Ultrium drive
Ultrium 215
HP Surestore DDS drive
DAT24
HP Surestore
DAT 24x6
HP Surestore
DAT40
HP Surestore DDS
DAT40x6 autoloader
HP Surestore DLT DLT drive
80
HP Surestore DLTvs drive
DLT1
HP Surestore DLT DLTvs drive
VS80
*Drive Identification in UNIX Configuration: These strings should be used in
UNIX scripts wherever the drive type has to be identified. There are no hardware
configuration switches.
**
Dashes (-) indicate spaces
http://www.hp.com/support/tape may have a later version
compaq
silicon
graphics
Maximum
Capacity
Type
(assuming 2:1
compression)
200 GB
200 GB
24 GB
DDS 24 GB on each
autoloader cartridge
DDS drive 40 GB
40 GB on each
cartridge
80Gb
80Gb
80Gb
hp learning products
ibm RS/6000
sun
Identifier String for
UNIX Configuration*
**
HP------Ultrium
**
HP------Ultrium
**
HP------C1537A
**
HP------C1557A
**
HP------C5683A
**
HP------C5713A
QUANTUM-DLT8000
**
BNCHMARKDLT1
**
BNCHMARKDLT1
© 2001, Hewlett-Packard Company
**