Panasonic KX-TA30820B User Manual page 31

2.1 Station Programming Instructions
To confirm the assigned data
—Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
program access number
Enter the program access number.
• Enter the program access number* as follows.
- 1: Preferred Line Assignment — Outgoing
- 2: Preferred Line Assignment — Incoming
- 3: Outside (CO) Line Ringing Selection
- 4: Intercom Alert Assignment
- 5: Call Waiting Tone Type Assignment
- 6: Self-Extension Number Confirmation (KX-TA30830 only)
- 7: Extension Password Set (Manager only)
- 8: Electronic Station Lockout — CANCEL ALL
- 0: Date and Time Setting (Operator/Manager only)
#
- : Station Programming Data Default Set
• The display shows the programmed data.
<PT Display Example>
When you press "5", the display shows:
C.W.Tone-1
— To exit the Station Programming mode, press the PROGRAM button.
— If you wish to change the data, follow the programming procedure explained in this
section.
* A program access number is required to program/confirm the data by Station Programming.
HOLD
Press HOLD.
• The display shows the initial programming mode.
— The Call Waiting tone is currently programmed to Tone 1.
Station Programming (Personal Programming)
2-3