Manager Programming (Manager Only) - Panasonic KX-TA30820B User Manual

3.3 Operator/Manager Service Features

Manager Programming (Manager only)

The manager (jack number 01) can program the following System Programming with
their extension password even when they do not know the system password for System
Programming.
• [001] System Speed Dialing Entry
• [011] System Speed Dialing Name Setting
• [512] DISA Security Codes
• [530] DISA Security Codes Digits Selection
To enter the programming mode
PT
Be sure the telephone is idle and on-hook.
Press PROGRAM.
<PT Display Example>
PITS-PGM NO?
Programming sequence
After entering the programming mode
PT
X X
Enter the Program Address.
After pressing the STORE button, you will hear one of the following tones.
Confirmation tone (1 beep): This informs you that storing is completed. You can
Alarm tone (3 beeps):
PROGRAM
<PT Display Example>
Password
X
parameters
Enter the parameters.
continue programming by entering the same or another
program address
(2 beeps): This informs you that the parameter has already been
stored.
This informs you that the entry is invalid.
extension password
Press #. Dial the extension password
of jack number 01.
<PT Display Example>
SYS-PGM NO?
AUTO DIAL
STORE
Press the AUTO DIAL/STORE
(STORE) button.
HOLD
Press the HOLD
(END) button.
Telephone Features
3-119