Panasonic CF-19CDBAXVM - Toughbook 19 Tablet PC Version Service Manual page 48

n Assembly of Main PCB
Process in the order of 1 2
MDC
If one screw is supplied, insert into the DIMM lower slot.
If two screws are supplied, insert into the DIMM upper and lower slots.
Coin Battery Preparation Coin Battery
Sub material (19mm width x 3 cm)
Wrap
10 3 mm
0 1mm
Sheet
Attach it on the board before
setting the Coin Battery.
0 1mm
Do not cover the screw hole
when setting the Coin Battery.
Avoid coming over the horizontal
line of the cross mark on the board.
3 4.
Basteraid
0 1mm
0 1mm
MDC Assy
DIMM SLOT
Modem Tape
Fold back
MODEM PCB Set
Fix the Screw (#5) from the back side.
Hexsagon Spacer H4.2
Screw
Screw
CPU Sheet
LAN Cable
DIMM Assy
9-27
Modem Cable
Connect to the MDC connector.
Fold the Tape in half.
Basteraid
0 1mm
0 1mm
Cover the Screw head
Screw
Screw