Panasonic CF-19CDBAXVM - Toughbook 19 Tablet PC Version Service Manual page 33

n Assembly of Inverter PCB (Application Model : Digitizer Model)
n Assembly of Touch Screen (Applicable Model : Touch Screen Model)
(Note)
Apply the load 20 to 30N (2.0 to 3.0 Kgf) to the Cushions.
Attach the surface to the LCD Front.
Avoid running over.
Touch Screen Ass'y
Touch Screen Ass'y
Protect Sheet
OK
Laminate
Attach it to the front side.
(Using the jig)
T/S
Dimensional tolerance: 0.2
NG
Laminate
T/S
9-12
Inverter Ass'y
LCD Back Dumper
A
Touch Screen
0 1mm
TS Spacer B
Ensure 4 and 5 do not run over the display side.
TS Spacer A
0 1mm
0 1mm
Conductive Tape
Details of "A"
Back Side
6 0.5mm
TS FPC
Spacer
0 0.5mm
Match to the wall of the
Cabinet. 0 to 0.5 mm
TS Spacer A
0 1mm
Match to the marking line.
0.5 mm
TS Spacer B
LCD Side Cushion B
Match to the marking line.
0.5 mm