3Ware 9650SE-2LPB-10 - Sataii Raid Hardware 10Pk Cli Manual page 44

Chapter 2. CLI Syntax Reference
x
/c show allunitstatus
x
/c show drivestatus
38
This command presents a count of total and Not Optimal units managed by
the specified controller /cx. For more about the meaning of Not Optimal, see
"Shell Object Commands" on page 24.
Example:
//localhost> /c0 show allunitstatus
/c0 Total Optimal Units = 2
/c0 Not Optimal Units = 0
This command reports a list of drives and their port assignment, status, the
unit with which they are associated, their size in gigabytes and blocks, and the
serial number assigned by the drive manufacturer. (Definitions of the drive
statuses are available in the 3ware Serial ATA RAID Controller User Guide.)
Example:
//localhost> /c0 show drivestatus
Port Status
--------------------------------------------------------------
p0 OK
p1 OK
p2 OK
p3 OK
p4 OK
p5 OK
p6 OK
p7 OK
p8 OK
p9 NOT-PRESENT
p10 NOT-PRESENT
p11 NOT-PRESENT
Unit Size
u0 149.05 GB 312581808
u0 149.05 GB 312581808
u1 149.05 GB 312581808
u1 149.05 GB 312581808
u1 149.05 GB 312581808
u2 149.05 GB 312581808
- 149.05 GB 312581808
- 149.05 GB 312581808
- 149.05 GB 312581808
- -
- -
- -
3ware Serial ATA RAID Controller CLI Guide
Blocks Serial
3JS0TF14
3JS0TETZ
3JS0VG85
3JS0VGCY
3JS0VGGQ
3JS0VH1P
3JS0TF0P
3JS0VF43
3JS0VG8D
- -
- -
- -