www.3ware.com
Table 5: Common Tasks Mapped to CLI Commands
Task
Set the queue policy
Set the storsave profile
Unit Configuration Changes
Change RAID level
Change stripe size
Expand unit capacity
Delete a unit
Remove a unit (export)
Name a unit
Controller Maintenance Tasks
Update controller with new
firmware
Add a time slot to a rebuild
schedule
Add a time slot to a verify
schedule
Add a time slot to a selftest
schedule
Enable/disable the rebuild/migrate
schedule and set the task rate
Enable/disable the verify schedule
and set the task rate
Enable/disable the selftest
schedule
View Alarms
Unit Maintenance Tasks
Start a rebuild
Start a verify
Pause/resume rebuild
Stop verify
Enable/disable autoverify
Common Tasks Mapped to CLI Commands
CLI Command
/cx/ux set qpolicy
/cx/ux set storsave
/cx/ux migrate
/cx/ux migrate
/cx/ux migrate
/cx/ux del
/cx/ux remove
/cx/ux set name
/cx update
/cx add rebuild
/cx add verify
/cx add selftest
/cx set rebuild
/cx set verify
/cx set selftest
/cx show alarms
/cx/ux start rebuild
/cx/ux start verify
/cx/ux pause rebuild and /cx/ux
resume rebuild
/cx/ux stop verify
/cx/ux set autoverify
Page
70
70
72
72
72
66
65
70
44
50
51
52
53
54
54
45
66
67
67
68
68
21