Ftp Server Test; E-Mail Test; Restart - TRENDnet TV-IP851WC User Manual

TRENDnet User's Guide

FTP Server Test

When you have set up the FTP Server in the configuration section, you can use this
screen to test that the FTP Server settings are correct. Pressing the Test button will
make a connection to the FTP Server and upload a file called test_date_time.jpg to the
FTP. If the file is not there, you should check that you have entered the FTP details
correctly in the configuration section.

E-mail Test

When you have set up an e-mail account in the configuration section, you can use this
screen to test that the E-mail settings are correct. Pressing the Test button will make the
camera send a test e-mail to the address specified in the configuration section. If you do
not receive the test e-mail, you should check that you have entered the e-mail details
correctly in the configuration section.
© Copyright 2013 TRENDnet. All Rights Reserved.

Restart

If you should need to restart the IP camera, you can do this from this screen.
Clicking Yes will initiate a reboot sequence on the camera. When you restart the
camera you will lose your connection to it. Wait 1 minute before attempting to
reconnect to the camera so that it has time to go through its boot up sequence.
Restarting the camera will retain the configuration settings you have entered.
TV-IP851WC / TV-IP851WIC
36