Bluetooth module
✎
The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is
available using spare part number 534436-001.
Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Keyboard cover (see
e. Right speaker (see
f. Top cover (see
Remove the Bluetooth module and cable:
1. Disconnect the Bluetooth module cable 1 from the system board.
2. Remove the Bluetooth module cable from the clips 2 and routing channel built into the base enclosure.
3. Remove Bluetooth module and cable 3.
Reverse this procedure to install the Bluetooth module.
Maintenance and Service Guide
"Battery" on page
"Hard drive" on page
8)
"Optical drive" on page
"Keyboard" on page
18)
"Keyboard cover" on page
"Right speaker" on page
"Top cover" on page
23).
6).
16)
20)
22)
Removal and replacement procedures
Spare part number
483113-001
4–37