Compaq Presario CQ35-100 - Notebook PC Maintenance And Service Manual page 61

Removal and replacement procedures
3. Disconnect the left speaker cable 1 from the system board.
4. Remove the left speaker cable 2 from the clips and routing channel through which it is routed.
5. Disconnect the microphone cable 3 from the system board.
6. Disconnect the display panel cable 4 from the system board.
7. Remove the display panel cable from the clips 5 and routing channel through which it is routed.
8. Disconnect the TouchPad cable 1 from the LIF connector on the system board.
9. Disconnect the TouchPad on/off button board cable 2 from the LIF connector on the system board.
10. Disconnect the fingerprint reader board cable 3 from the system board.
Maintenance and Service Guide 4–25