Bluetooth module
Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Keyboard cover (see
e.
Speaker assembly (see
f.
Display assembly (see
g.
Top cover (see
Remove the Bluetooth module:
1.
Turn the top cover upside down with the front toward you.
2.
Disconnect the Bluetooth module cable (1) from the system board.
3.
Remove the two silver PM2.0×3.0 screws (2) and the tab (3) that secure the Bluetooth module to
the top cover.
4.
Release the cable from the routing channels built into the system board (4).
64
Chapter 4 Removal and replacement procedures
Battery on page
34).
Hard drive on page
36)
Optical drive on page
Keyboard on page
44)
Keyboard cover on page
Speaker assembly on page
Display assembly on page
Top cover on page
59)
35)
46)
49)
51)
Spare part number
483113-001