Table of Contents
Advertisement
Display assembly
✎
The display assembly spare part kit includes 2 WLAN antenna transceivers and cables, webcam, microphone,
nameplate, and logo.
Description
13.3-in BrightView display assembly for use only with computer models equipped with webcam
13.3-in BrightView display assembly for use only with computer models not equipped with webcam
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Disconnect the wireless antenna cables from the WLAN module (see
6. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Keyboard cover (see
e. Right speaker (see
f. Top cover (see
g. Left speaker (see
Maintenance and Service Guide
"Battery" on page
"Hard drive" on page
8)
"Optical drive" on page
"Keyboard" on page
18)
"Keyboard cover" on page
"Right speaker" on page
"Top cover" on page
23).
"Left speaker" on page
6).
16)
20)
22)
28)
Removal and replacement procedures
Spare part number
531798-001
531799-001
"WLAN module" on page
11).
4–29
Advertisement
Table of Contents
