Download Print this page

Model And Serial Number Location; Care & Cleaning; Before You Call For Service - Kenmore 9410 - 30 in. Electric Range Installation Instructions Manual

30" electric range for 3 or 4 wire, 60hz systems
Hide thumbs Also See for 9410 - 30 in. Electric Range:

Advertisement

Model and Serial Number Location
The serial plate is located on the right-hand surface of the
oven front frame at the storage or warmer drawer; or the
lower panel area.
When ordering parts for or making inquires about your range,
always be sure to include the model and serial numbers and
a lot number or letter from the serial plate on your range.
Your serial plate also tells you the Kilowatt rating (power
requirements) and Voltage ratings
Care, Cleaning
and Maintenance
Refer to the Use & Care Manual for cleaning instructions.
If removing
the range is necessary
for cleaning
or
maintenance, disconnect the electrical power supply. If the
electrical supply is inaccessible, lift the unit slighUyat the front
and pull out away from the wall. Pull only as far as necessary
to disconnect the electrical supply. Finish removing the unit
for servicingandcleaning. Reinstallinreverseordermaking
sure to level the range and check electrical connections. See
pages 2 and 3 for proper anchoring instructions.
Before You Call for Service
Read the "Before You Call" and operating instruction sections
in your Use & Care Manual. It may save you time and
expense. The list includes common occurrences that are not
the result of defective workmanship or materials in this
appliance.
Refer to the warranty in your Use & Care Manual for our toll-
free service number and address. Please call or write if you
have inquiries about your range product and/or need to order
parts.
...............
@@
Serial plate location
Open storage or warmer drawer,
or remove lower panel
(on some models)

Advertisement

loading