Usage Of The Drain Hose - Haier HWM80-0528 User Manual

How to change the direction of the drain hose
1.Dismantle the back cover of the washing
machine.
2.Put down the drain hose. Take off the
drain hose frame. As indicated in Figure
1, put the drain hose into the cabinet.
Then stretch one hand into the cabinet
to nip the claw of the drain hose bush-
ing to remove the claw from original
position. Take off the drain hose bush-
ing with the other hand. (As indicated in
Figure 2 and 3).
Outer
drain
hose
Drain hose frame
Figure 1
Cabinet
Inner
Press
Drain hose
bushing claw
Press

Usage of the drain hose

The drainage shall be smooth with the drain hose
ut the drain hose up to suitable position.Do not
put it on ground.
Notes:the mouth of drain pipe should higher than
the water level of washing tub for avoiding
to siphon phenomenon during drain.
Do not tramp or press the drain hose.
Drain hose bushing
Figure 2
Outer
Drain hose
bushing
Take off
Figure 3
3.Dismantle the protecting cover of the
drain outlet at the other side (method
the same as the bushing). Install the
bushing as per indicated in Figure 4.
4.Extend the drain hose from the other
side. Fix the drain hose onto the base
frame with the drain hose frame. (As
indicated in Figure 5)
Drain outlet
protecting cover
Drain hose bushing
Figure 4
5.Install the protecting cover of the drain
outlet at the other side as per indicated
in Figure 6.
5
Figure 5
Figure 6
Mouth of
H
drain hose
0.8<H<1.2m