Table of Contents
Advertisement
5 Use the operation buttons
a Description of operation button
Process,remain time digitron
It displays "--" during detecting.
It displays total remained time
(min). If the total time exceeds 99
minutes, it uses "A" on tens digit
to represent100 minutes, and uses
"b" to represent 110 minutes.
E.g. A3" represents 103 minutes.
"
It displays abnormal symbol in
abnormal situation.
(See to Page14)
START/PAUSE
"
After the power is switched on,
press it to start the machine.
During working,push it to pause.
During pause,push this button to
restart and go on working
TIME
REMAINING
PROGRAM
PROGRAM
Press
" PROGRAM " button
can select one or several
of
NORMAL HEAVY QUICK WASH
and SPIN ONLY.
Remarks: After pressing "Power On/Off" to connect power supply, if the washing
machine lasts idle more than 5 min, it would automatically shut off the supply.
button
"
START
PAUSE
WATER
LEVEL
you
programs
"POWER ON/OFF" button
Push the " POWER ON/OFF" button to
switch on the power.
Under power-on mode, push it to switch
off the power.
Push the " POWER ON/OFF" button to
switch on the power. If the " POWER
ON/OFF" button is not pushed, the
machine will switch off the power
automatically after 5 minutes.
POWER
ON/OFF
" WATER LEVEL"button
The user selects a suitable water
level depending on the load.
During normal and heavy programs,
if no water in tub, the washing machine
execute fuzzy program,select the water
level automatically according as quantity
of laundries. .If wet laundries are put in,
you must set suitable water level by yourself.
10
Advertisement
Table of Contents
