Removing The Tub & Basket And Baffle - Whirlpool HE2t - 3.7 cu. Ft. Front Load Washer User Manual

REMOVING THE TUB & BASKET AND BAFFLE
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Pull the washer away from the wall.
4. Remove the detergent dispenser assem-
bly (see pages 4-10 through 4-12 for the
procedure).
5. Loosen the clamp and remove the main
water feed tube from the detergent dis-
penser.
6. Pull the free end of the main water feed
tube from the tub opening.
REASSEMBLY NOTE: When you reconnect
the water feed tube, align the arrow on the tube
with the line on the detergent dispenser.
Tube To Dispenser
Line
Arrow
Water Feed Tube
Tube To Tub
7. Remove the eight hex-head screws from
the front frame and remove the frame.
Front Frame Screws
8. Remove the 1/2˝ bolts (3 each) from the
front top and bottom tub weights, and re-
move the weights from the tub.
Top Front
Weight
9. Rotate the support out of the way, and
remove the three 1/2˝ bolts from the top
rear weight, then remove the weight from
the washer.
Top Rear
Weight
4-28
Bottom Front
Weight
Support Bracket