Ism Profile Settings; Ip Multicast Profile Settings - D-Link DGS-3200-16 - Switch - Stackable User Manual

Layer 2 managed gigabit ethernet switch
Table of Contents

Advertisement

xStack
Parameter
ISM VLAN Global State
VLAN Name
State
Member Port (e.g.: 1-4, 6)
Tagged Member Port
VID (2-4094)
Replace Source IP
Source Port (e.g.: 1-4, 6)

ISM Profile Settings

Users can configure ISM profile settngs.
To view the following window, click L2 Features > IGMP Snooping > ISM Profile Settings:
The following parameters may be viewed or modified:
Parameter
Profile Name

IP Multicast Profile Settings

Users can add a profile to which multicast address(es) reports are to be received on specified ports on the Switch. This function
will therefore limit the number of reports received and the number of multicast groups configured on the Switch. The user may set
an IP Multicast address or range of IP Multicast addresses to accept reports (Permit) or deny reports (Deny) coming into the
specified switch ports.
To view the following window, click L2 Features > IGMP Snooping > IP Multicast Profile Settings:
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Description
Enable or disable the IGMP Snooping Multicast (ISM) VLAN Global State.
Enter the name of the new Multicast VLAN to be created. This name can be up to 32
characters in length. This field will display the pre-created name of a Multicast VLAN
in the Modify window.
Use the pull-down menu to enable or disable the selected Multicast VLAN.
Enter a port or list of ports to be added to the Multicast VLAN. Member ports shall be
the untagged members of the multicast VLAN.
Enter a port or list of ports that will become tagged members of the Multicast VLAN.
Add or edit the corresponding VLAN ID of the Multicast VLAN. Users may enter a
value between 2 and 4094.
This field is used to replace the source IP address of incoming packets sent by the
host before being forwarded to the source port.
Enter a port or list of ports to be added to the Multicast VLAN. Source ports shall be
the tagged members of the multicast VLAN.
Figure 3 - 23. ISM Profile Settings window
Description
Enter a name for the ISM Profile.
73

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents