Canon PowerShot SD400 Software User's Manual page 83

Chapter 6
Using Supplementary Features
How to run a slide show
1.
Select the images for the slide show in the Browser
Area.
2.
Click [SlideShow] in the Control Panel.
Slide show will start.
REFERENCE
• To show all of the images in a folder in a slide show, it is conve-
nient to click the [Selecting Images] menu in the Display Control
Panel and select [Select All].
• You can also start a slide show by clicking the [View] menu and
selecting [Slide Show].
83
ImageBrowser Software User Guide
Running Slide Shows (2/3)
Slide Show Control Panel
While running a slide show, you can use the control buttons at
the bottom of the window to control the show.
Back one image
Go to first image
Star Ratings Button
You can set the Star
Rating for an image
while it is being
Print Settings Button
displayed in a slide
Click this button during a slide show when
show.
you see an image you would like to print (a
check mark appears beside the button to
indicate marked images). After the slide
show finishes, a dialog for printing the
marked photos will automatically appear.
Image Selection Button
Click this button during a slide show to select/deselect images (a
check mark on the button indicates a selected image). After the
slide show finishes, the deselected images are no longer selected in
the Browser Window. You can also use this function to place a check
mark on needed images while they are displayed in the slide show.
This is useful when you wish to move selected images (images with
a check mark) in the Browser Area to a different folder.
Pause
Next image
Advance to last image
Stop slide show