Canon PowerShot SD400 Software User's Manual page 73

Chapter 6
Using Supplementary Features
Trimming
Use this to delete unnecessary portions of the image and leave
only the necessary portions.
1.
Click [Edit] in the Viewer Window and select
[Trimming].
The Trimming Dialog Box will appear.
2.
Position the mouse pointer over the image and drag
it to select the trimming area.
Drag to specify the trimming area.
You can change the
display magnification.
You can adjust the trimming area by
dragging the corners or center points
of the sides.
73
ImageBrowser Software User Guide
Editing Images (2/4)
You can also specify the trimming
area with numbers.
3.
Click [Trimming].
The specified area is trimmed.
4.
Check the trimmed image and click [Finish].
This completes the trimming procedure.
REFERENCE
• You can also start the trimming procedure by clicking the [Edit]
menu and selecting the [Edit Still Image], followed by
[Trimming].
Click this button.
Use this to reset the specified area.