Converting Raw Images - Canon PowerShot SD400 Software User's Manual

Chapter 6
Using Supplementary Features
If your camera supports RAW images you can handle higher quality
images.
However, since they are a special type of image, they cannot be opened
by many image editing programs. It is first necessary to convert them
into standard image files.
This section explains conversion procedures.
IMPORTANT
• See your Camera User Guide to check whether your camera
supports RAW images or not.
• Depending upon your camera model, a different program
than the one introduced here may start when you convert
RAW images. If that occurs, refer to the manual for the
software supplied with your camera.
REFERENCE
• RAW images are extremely high-quality images that are not
subject to any deterioration due to compression processing.
102
ImageBrowser Software User Guide

Converting RAW Images (1/5)

Converting RAW Images
1.
Select a RAW image in the Browser Area.
2.
Click the [File] menu and select [RAW Image Processing].
When the window showing the procedures for converting and
adjusting RAW images appears, click [OK].
As shown below and on the following pages, the main
window, navigator window and Image Quality Adjustment
Window will display.
REFERENCE
• If the navigator window does not appear, click the [View] menu
and select [Show Navigator].
■
Main Window
The conversion is conducted in this window.
Thumbnail
Check Mark
You can use these
buttons to switch
between images and
display modes and set
various conversion
settings, such as the
image rotation.
Preview