I-Personalize™ Operation; About I-Personalize; Data Downloading - Alpine CDA-9854L Owner's Manual

i-Personalize™
Operation
SOURCE/POWER
MENU

About i-Personalize™

You can download data (from Alpine's website) to a CD-R, and
download and store the data to the CDA-9854L.
To start i-Personalize, access the URL below and follow the on-screen
instructions.
http://www.alpine.com or http://www.alpine-usa.com
Downloadable data
Parametric Data is memorized in Preset 6 of the
equalizer or Parametric EQ mode or Graphic EQ
Graphic equalizer mode.
Time correction Data is memorized in Preset 6 of the
Time Correction mode.
Crossover Data is memorized in Preset 6 of the
crossover mode.
The file name of download data shall be
"A_U*****.MP3."
A_U∗∗∗∗∗.MP3
Extender (fixed)
Identifier (alphabet or number 5
letters maximum)
Header (fixed)
You can create a file name via the website. Do not change a
file name once it has been created. Malfunction may result.
• For downloading procedure details, see ALPINE's Web site.
• If the HDA-5460 model is connected to this unit, the HDA-5460
hard disc can be used. Data that has been stored in the hard disc is
downloaded by the "Data Downloading" operation to CDA-
9854L. For details on how to download data to the hard disc, refer
to the Owner's Manual of the HDA-5460 model.
• If an external audio processor is connected, data that is
downloaded cannot be used.
GlideTouch bar

Data Downloading

1
Insert the CD-R disc containing the data.
If the source is not the CD mode, press
SOURCE/POWER to change to CD mode.
2
Press MENU.
3
Select the Download mode by sliding your finger
on the GlideTouch bar to the left or right. Press
the GlideTouch bar under the Download mode.
4
Select YES by pressing the GlideTouch bar under
YES.
Data search of the disc starts and the first file name is
displayed.
• If you want to cancel the data search, press the GlideTouch bar
under NO.
• If a file is not found by a data search, "No File" is indicated.
• The "No File" display will automatically disappear if no operation
is performed for 5 seconds.
5
Select the file to download by sliding your finger
on the GlideTouch bar to the left or right. Press
the GlideTouch bar under the desired file.
Data downloading starts.
6
When data download is finished successfully, each
confirmation screen of download data is
sequentially displayed, and download finishes.
Successfully downloaded items are indicated as checked
boxes on the confirmation screen.
PARAMETRIC EQ or Graphic EQ data *
The data is memorized in Preset 6 of Parametric EQ mode or
Graphic EQ mode. The memorized data settings in Preset 6
(Parametric EQ mode or Graphic EQ mode) are automatically
applied.
X-OVER (Crossover) data
The data is memorized in Preset 6 of X-OVER mode. The
memorized data settings in Preset 6 (X-OVER mode) are
automatically applied.
You cannot download the data if the setting of the 2WAY/3WAY
switch is not suitable for the data.
TIME CORRECTION data
The data is memorized in Preset 6 of the Time correction
mode. The memorized data settings in Preset 6 (Time
Correction mode) are automatically applied.
* If the downloaded parametric EQ or graphic EQ differs from
the current EQ mode, Preset 6 setting will not change
automatically. Change the EQ mode and recall Preset 6.
* If data is downloaded while setting DEFEAT to ON, Preset 6
setting will not change automatically. Recall Preset 6 in the EQ
mode.
7
Press and hold MENU for at least 2 seconds to
return to normal mode.
• When you download the data again, the data is overwritten in
Preset 6.
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit will return to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
25
-EN