Adding Andclearing Channels A Ndinputs Inthehistory List; Tuning Tothenextprogrammed Channel; Tuning To A Specific Channel (Programmed Or Unprogrammed) - Toshiba 40E220U User Manual

2
Using theTV'sfeatures
Tuning channels using the Channel Blvwser
TM
Adding andclearing channels a ndinputs intheHistory List
Adding channels and inputs to the History List:
As a channel or input is tuned, the Channel Browser
TM
adds it to the
History List and displays it on the right side of the Channel
Browser
TM.
Previously tuned channels/inputs are shifted to the left,
eventually moving off the left side. Press the BACK CB arrow
button to surf backward through the previously tuned
channels/inputs. Any channel or input that is tuned repeatedly will
not be repeated in the History List, but instead is moved to the end
of the list on the right side of the Channel Browser
TM.
The Channel Browser
TM
will store the following channels:
o:. All channels that are tuned using the numeric buttons on the
remote control.
°1o All channels that are tuned using the CH Up/CH Down
buttons on the remote control.
NOTE
Whenever an itemis selected thatcannotbetuned(forvarious
reasons), theTVwill automatically t uneto thepreviously viewed
channel o r input.
Clearing channels from the History List:
o:o Reconfiguring the ANT/CABLE input will clear the History
List. see "ANT/CABLE IN" on page 45
o:o Turning off the TV will clear the History List.
Tuning tothenextprogrammed channel
To tune to tile next programmed channel, press tile CH Up/CH
Down buttons on the remote control or TV control panel.
NOTE
This featurewill not function until you haveprogramedchannels into
the TV's channel memory, see "Storing channels in memory
(optional)" on page46.
Tuning toa specific channel ( programmed or unprogrammed)
To tune analog channels:
*l* Press the Channel Number (0-9) on the remote control. For
example, to select channel 125, press 1,2, 5, and then press the
ENTER button.