Toshiba 40E220U User Manual page 27

Connecting Your"IV
27
Connecting an HDMI® or DVI device to the HDMI® input
NOTE EIA/CEA-861-D c ompliance coversthetransmission of
uncompressed digitalvideowith high-bandwidth digital
contentprotection, w hichis beingstandardized f or reception of
high-definition videosignals.Because this is an evolving
technology, it is possible thatsome devices maynotoperate properly
withtheTV.
The HDMI °9input can accept and display VGA, SVGA, XGA,
WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i
(60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal
specifications, see "HDMI® signal formats" on page 122.
Supported Audio format: Linear PCM, sampling rate 32/44. 1/48
kHz.
NOTE
TO connect a computer t o theHDMI ® input,see"Connection t o the
TV'sHDMI®terminal"on page33.
To connect an HDMF ° device, you will need one HDMI °9cable
(type A connector) per HDMI _9 device.
o:o For proper operation, it is recommended that you use an
HDMF _cable with the HDMI _9 Logo (H_m|).
o:° HDMF _cables transfer both video and audio. Separate analog
audio cables are not required. See "Setting the HDMI® audio
mode" on page 50.
TVback panel
H_mi
Playback d evice
(Sample Illustration) Connecting an HDMf _'_ d evice