HP Media Center m1100 - Desktop PC Getting Started Manual page 37

Displays tab
1
Click the Displays tab. This tab shows a
monitor and a TV. The upper-left corner of
each display icon is a button and a status
indicator. A red corner indicates an inactive
display; a green corner indicates an active
display.
2
To view the PC image on your PC monitor and
your TV simultaneously, click the upper-left
corner of the TV icon so that it is green. Click
Apply.
Or
Disabling the TV option
When you want to disconnect the TV from the PC,
you may need to disable the TV option to return your
PC display to its original resolution.
To disable the TV option to view your PC image on
the original display:
1
Right-click an empty area of the screen, and
choose Properties.
2
Click the Settings tab.
3
Click the Advanced button.
nView tab (disabling)
1
Click the nView tab.
2
If you viewed the PC image on your PC
monitor and your TV simultaneously, in the
nView Display Mode in the list on the left,
select the Standard [Dualview] option.
Or
To view the PC image on just the TV, click the
TV corner so it is green, and then click the
monitor corner so it is red. Click Apply.
3
When the PC image appears on the TV
screen, click Yes to keep the setting. You have
15 seconds to accept this new setting before it
reverts to the previous setting.
4
Click the OK button to save changes, and
then click OK again to close the Display
Properties window.
4
Look at the tabs and follow the steps that
apply to your PC:
If you see the nView tab, continue with
■
"nView Tab (Disabling)" procedure.
If you see the Ge Force FX xxxx tab,
■
continue with the "Ge Force FX Tab
(Disabling)" procedure. (FX xxxx is the
video card number.)
If you see the Displays tab, continue with
■
the "Displays Tab (Disabling)" procedure.
If you viewed the PC image on just the TV,
click the nView Display Mode in the list on the
left, select Standard [Dualview], click the
Current display drop-down list, and then
select the Analog Display option.
3
Click the OK button.
4
When the PC image appears on the TV
screen, click Yes to keep the setting. You have
15 seconds to accept this new setting before it
reverts to the previous setting.
n
Your TV must be
connected to the PC to
change the display.
Connecting the Television Signal
33