HP Media Center m1100 - Desktop PC Getting Started Manual page 36

n
The type of video
card on your PC
determines how the
PC selects the TV-out
option. Some options
and menus in this
procedure may be
different for your PC.
32
HP Media Center PC Getting Started Guide
Viewing the PC image on the TV
To view your PC image on the TV:
1
Make sure the video and audio cables are
connected before you turn on the TV and
the PC.
2
Turn on the TV. Press the Video/TV button on
your remote control to select the Video setting,
not the TV setting.
3
Turn on the PC.
4
When the Windows desktop appears,
right-click an empty area of the desktop and
choose Properties. The Display Properties
window opens.
nView tab
1
Click the nView tab.
2
To view the PC image on your PC monitor and
your TV simultaneously, in the nView Display
Mode area, select Clone.
Or
To view the PC image on just the TV, in the
area nView Display Mode, select Standard
[Dualview], click the Current display
drop-down list, and then select TV.
Ge Force FX tab
1
Click the Ge Force FX xxxx tab. (FX xxxx
is the video card number.)
2
To view the PC image on your PC monitor and
your TV simultaneously, in the nView Modes
area select Clone from the drop-down list.
Or
To view the PC image on just the TV, in the
area nView Modes, select Single display
from the drop-down list, and then, if
necessary, in the Current display area select
TV from the drop-down list.
5
Click the Settings tab.
6
Click the Advanced button.
7
Look at the tabs and follow the steps that
apply to your PC:
If you see the nView tab, continue with the
■
"nView Tab" procedure.
If you see Ge Force FX xxxx tab, continue
■
with the "Ge Force FX Tab" procedure.
(FX xxxx is the video card number.)
If you see the Displays tab, continue with
■
the "Displays Tab" procedure.
3
Click the OK button.
4
When the PC image appears on the TV
screen, click Yes to keep the setting. You have
15 seconds to accept this new setting before it
reverts to the previous setting.
5
Click the OK button to save changes, and
then click OK again to close the Display
Properties window.
3
Click the Apply button.
4
When the PC image appears on the TV
screen, click Yes to keep the setting. You have
15 seconds to accept this new setting before it
reverts to the previous setting.
5
Click the OK button to save changes, and
then click OK again to close the Display
Properties window.