Dirt Sensor - Panasonic MC-CG985 Operating Instructions Manual

Dirt Sensor

Dirt Sensor
Détecteur de poussière
Detector de tierra
➢ ➢ The dirt sensor light system is mounted
on the POWER NOZZLE near the reset
button. It consists of a series of three
red lights and one green light.
➢ ➢ The lights give you an indication of the
amount of dirt particles that are passing
through the sensor on its way to the
dust bag.
INITIAL START UP
➢ ➢ When the POWER NOZZLE is first
started, the following light sequence
occurs in a two second time frame:
1. All three reds come on.
2. Two reds are on.
3. One red is on.
4. One green is on and will remain on
until the POWER NOZZLE is placed in
use.
NOTE: If the nozzle is on a surface that has
dirt on it, dirt will be picked up by the vacu-
um and one or more red lights might stay
on.
IN OPERATION
➢ ➢ When the POWER NOZZLE is being
moved back and forth on the floor, the
lights will change from one
configuration to another as more dirt or
less dirt is being vacuumed.
➢ ➢ As long as one or more red lights are on,
dirt is passing through the wand to
indicate that the surface still needs
cleaning.
➢ ➢ When the green light stays on as the
POWER NOZZLE is moved back and
forth over an area, the sensor is not
seeing enough dirt to warrant further
cleaning of that area.
NOTE: Dirt sensor lights DO NOT function
in the FLOOR setting.
- 36 -