Asus Ez Flash Utility - Asus P5GC MX 1333 - Motherboard - Micro ATX User Manual

Windows Vista environment
®
a. Insert a formatted, high density 1.44 MB floppy disk to the floppy disk
drive.
b. Click
c. Right-click Floppy Disk Drive then click Format to display the Format 3
1/2 Floppy dialog box.
d. Select the Create an MS-DOS startup disk check box.
e. Click Start.
2. Copy the original or the latest motherboard BIOS file to the bootable floppy disk.
2.1.2

ASUS EZ Flash utility

The ASUS EZ Flash feature allows you to update the BIOS without having to go
through the long process of booting from a floppy disk and using a DOS-based
utility. The EZ Flash utility is built-in the BIOS chip so it is accessible by pressing
<Alt> + <F2> during the Power-On Self Tests (POST).
To update the BIOS using EZ Flash:
1. Visit the ASUS website (www.asus.com) to download the latest BIOS file for the
motherboard and rename the same to P5GCMX.ROM.
Make sure to choose the right BIOS files from ASUS website according to the
version of your mother board. Refer to your Printed Circuit Board (PCB) for
version information.
2. Save the BIOS file to a floppy disk, then restart the system.
3. Press <Alt> + <F2> during POST to display the following.
EZFlash starting BIOS update
Checking for floppy...
4. Insert the floppy disk that contains the BIOS file to the floppy disk drive. When
the correct BIOS file is found, EZ Flash performs the BIOS update process and
automatically reboots the system when done.
EZFlash starting BIOS update
Checking for floppy...
Floppy found!
Reading file "P5GCMX.ROM". Completed.
Start erasing.......|
Start programming...|
Flashed successfully. Rebooting.
• Do not shut down or reset the system while updating the BIOS to prevent
system boot failure!
• A "Floppy not found!" error message appears if there is no floppy disk in the
drive. A "P5GCMX.ROM not found!" error message appears if the correct
BIOS file is not found in the floppy disk. Make sure that you rename the
BIOS file to P5GCMX.ROM.
ASUS P5GC-MX/1333
from the Windows
®
desktop, then select Computer.
2-3