Serial Ata Hard Disk Drive Connection - Asus P5B DELUXE User Manual

•
•

Serial ATA hard disk drive connection

Connector
SATA1/2/5/6
SATA3/4
-
You must install Windows
Service Pack 1 before using Serial ATA hard disk drives. The Serial ATA
RAID feature (RAID 0/RAID 1/RAID 5/RAID 10) is available only if you are
using Windows 2000/XP or later version.
®
When using the connectors in Standard IDE mode, connect the primary
(boot) hard disk drive to the SATA1/2/5/6 connector. Refer to the table
below for the recommended SATA hard disk drive connections.
Color
Red
Black
Connect the right-angle side
of SATA signal cable to SATA
device. Or you may connect the
right-angle side of SATA cable to
the onboard SATA port to avoid
mechanical conflict with huge
graphics cards.
2000 Service Pack 4 or the Windows
®
Setting
Master
Slave
right angle side
Chapter : Hardware information
XP
®
Use
Boot disk
Data Disk