Raid Configuration; Before Creating A Raid Set - Asus P5B DELUXE User Manual

5.4.3 JMicron
®
The JMicron
JBOD sets on the external Serial ATA hard disk drives.

Before creating a RAID set

Prepare the following items:
1. Two SATA HDDs, preferably with the same model and capacity.
2. A write-enabled floppy disk
3. Microsoft
4. Motherboard support CD with JMB363 driver
Complete the following steps before you create a RAID set:
1. Install the external Serial ATA hard disk drives (HDDs) on your system.
2. Set the JMicron Controller Mode item in the BIOS to [RAID]. See section
"4.4.6 Onboard Devices Configuration" for details.
Advanced
Configure Win627EHF Super IO Chipset
HD Audio Controller
Front Panel Support Type
Onboard 1394 Controller
Onboard PCIE GbE LAN_1
LAN Option ROM
Onboard PCI LAN_2
LAN Option ROM
JMicron SATA/PATA Controller
JMicron Controller Mode
Serial Port1 Address
3. Enter the JMB363 RAID BIOS utility to set up your RAID configuration.
4. Create a JMB363 RAID driver disk for Windows
"5.5 Creating a RAID driver disk" for details.
5. Install the JMB363 driver after the Windows
-
®

RAID Configuration

Serial ATA controller allows you to configure RAID 0, RAID 1 and
® ®
Windows OS installation disk (Windows 2000/XP)
v02.58 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
[Enabled]
[AC97]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Enabled]
[RAID]
[3F8/IRQ4]
®
OS had been installed.
E n a b l e o r D i s a b l e
High Definition Audio
Controller
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
®
OS installation. See section
Chapter 5: Software support