•
You must install the Windows
hard disk drives. The Serial ATA RAID feature (RAID 0 and RAID 1) is
available only if you are using Windows
•
When using the connectors in Standard IDE mode, connect the primary
(boot) hard disk drive to the SATA1/2/5/6 connector. Refer to the table
below for the recommended SATA hard disk drive connections.
Serial ATA hard disk drive connection
Connector
SATA 1/2/5/6
SATA 3/4
Connect the right-angle side
of SATA signal cable to SATA
device. Or you may connect the
right-angle side of SATA cable to
the onboard SATA port to avoid
mechanical conflict with huge
graphics cards.
ASUS P5E-V HDMI
XP Service Pack 1 before using Serial ATA
®
Color
Red
Black
XP or later version.
®
Setting
Master
Slave
right angle side
Use
Boot disk
Data disk
2-31