Table of Contents
Advertisement
4.
JMicron JMB363
This connector is for a Serial ATA signal cable. This connector supports
a Serial ATA hard disk drive that you can configure for RAID through the
onboard Serial ATA RAID controller.
The JMicron JMB363 controller item in the BIOS is set to [AHCI] by default,
allowing you to use the connectors to build a RAID set. See section "4.4.6
Onboard Device Configuration" for details.
P5B Deluxe SATA_RAID connector
Before creating a RAID set using Serial ATA hard disks, make sure that you
have connected the Serial ATA signal cables and installed Serial ATA hard disk
drives; otherwise, you cannot enter the JMicron
BIOS setup during POST.
ASUS P5B Deluxe
®
Serial ATA RAID connector (7-pin SATA_RAID)
SATA_RAID
JMB363 RAID utility and SATA
®
-
Hide quick links:
Advertisement
Table of Contents
