Table of Contents
Advertisement
2.5.5 APM Configuration
Power Button Mode
Restore on AC Power Loss
Power On By PS2 Keyboard
Power On By PS2 MOUSE
Power On By PCI Devices
Power On By External Modem
Power On By RTC Alarm
Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the
power button is pressed. Configuration options: [On/Off] [Suspend]
Restore on AC Power Loss [Always Off]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state
whatever was the system state before the AC power loss. Configuration
options: [Always Off] [Always On] [Keep Previous State]
Power On By PS/2 Keyboard [Disabled]
This parameter allows you to disable or set specific keys on the keyboard
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Space Bar] [Ctrl-Esc] [Power Key]
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]
If the Power On By PS/2 Keyboard is enabled, the Power On by
PS/2 Mouse function is disabled.
4-28
[On/Off]
[Always OFF]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Select Screen
Select Item
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
Chapter 4: BIOS Setup
Advertisement
Table of Contents
