Internal Connectors - Asus P4S800D-E Deluxe User Manual

8. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB)
ports are available for connecting USB 2.0 devices.
9. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB)
ports are available for connecting USB 2.0 devices.
10. Serial connector. This 9-pin COM1 port is for serial devices.
11. S/PDIF out jack. This jack connects to external audio output devices.
12. PS/2 keyboard port. This purple connector is for a PS/2 keyboard.

2.7.2 Internal connectors

1. IDE connectors (40-1 pin PRI_IDE1, SEC_IDE1)
This connector supports the provided UltraDMA133/100/66 IDE hard
disk ribbon cable. Connect the cable's blue connector to the primary
(recommended) or secondary IDE connector, then connect the gray
connector to the UltraATA133/100/66 slave device (hard disk drive) and
the black connector to the UltraATA1133/100/66 master device.
1. Follow the hard disk drive documentation when setting the device
2. Pin 20 on each IDE connector is removed to match the covered hole
3. The hole near the blue connector on the UltraATA cable is intentional.
®
P4S800D-E
P4S800D-E IDE Connectors
2-22
in master or slave mode.
on the UltraATA cable connector. This prevents incorrect orientation
when you connect the cables.
NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to PIN 1.
PIN 1
Chapter 2: Hardware information