Konica Minolta bizhub 215 User Manual page 25

3.4 Manual installation using the Add Printer Wizard
8
Specify the IP address.
% To use the LPR/Port 9100 protocol, select [TCP/IP Device], and enter the IP address.
9
Click [Next].
% If the [Additional Port Information Required] or [More Port Information Required] window appears,
go to Step 10.
% If the [Install the printer driver] dialog box appears, go to Step 13.
10
Check [Custom] and click [Settings...].
11
Change the settings according to the port, and then click [OK].
% For LPR connection, select [LPR], and then enter "Print" in the [Queue Name:] box.
% You must discriminate between upper and lower case letters when entering it.
% For Port 9100, select [Raw], and then enter a RAW port number (initial setting: [9100]) in the [Port
Number:] box.
% If both LPR and Port 9100 are enabled on this machine, the printer driver is connected to this ma-
chine using LPR.
12
Click [Next].
The [Install the printer driver] dialog box appears.
13
Click [Have Disk..].
14
Click [Browse...].
15
Select the driver information file in the desired printer driver folder on the CD-ROM, then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used.
% The driver information file is "KMWTG.inf" for the GDI driver, "KMWTP.inf" for the PCL driver and
"ONX.inf" for the XPS driver.
16
Click [OK].
The [Printer] list appears.
17
Click [Next].
18
Follow the instructions on the pages that follow.
% If the [User Account Control] window appears, click [Continue] or [Yes].
% When the Verify the publisher dialog box of [Windows Security] appears, click [Install this driver soft-
ware anyway].
19
Click [Finish].
20
After finishing the installation, ensure that the icon for the installed printer appears in the [Printers] or
[Devices and Printers] window.
21
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
bizhub 215
3
3-9