Connect The Power Cord; Install The Ink Cartridges - Brother DCP-J140W Quick Setup Manual

3

Connect the power cord

Important
DO NOT connect the USB cable yet (if you are
using a USB cable).
a
Connect the power cord.
Note
The Warning LED on the control panel will stay on
until you have installed the ink cartridges.
4
4

Install the ink cartridges

CAUTION
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
Note
Make sure you install the Starter Ink Cartridges
included with your machine first.
a
Make sure that the power is turned on.
The LCD shows:
No Ink Cartridge
b
Open the ink cartridge cover a.
c
Remove the green protective part a.
Note
Do not throw away the green protective part. You
will need it if you transport the machine.
1
1 1