Table of Contents
Advertisement
2.4
Advanced menu
The Advanced menu items allow you to change the settings for the CPU
and other system devices.
Take caution when changing the settings of the Advanced menu items.
Incorrect field values can cause the system to malfunction.
USB Configuration
JumperFree Configuration
CPU Configuration
Chipset
Onboard Devices Configuration
PCIPnP
2.4.1
USB Configuration
The items in this menu allows you to change the USB-related features.
Select an item then press <Enter> to display the configuration options.
USB Configuration
Module Version - 2.24.0-10.4
USB Devices Enabled:
USB Controller
Legacy USB Support
USB 2.0 Controller Mode
BIOS EHCI Hand-Off
The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the item shows None.
USB Controller [USB OHCI + EHCI]
Allows you to disabled or set the USB controller.
Configuration options: [Disabled] [USB OHCI] [USB OHCI + EHCI]
2-18
None
[USB OHCI + EHCI]
[Auto]
[HiSpeed]
[Enabled]
Configure CPU.
Select Screen
Select Item
Enter Go to Sub-screen
F1
General Help
F10
Save and Exit
ESC
Exit
Chapter 2: BIOS setup
Advertisement
Table of Contents
