Brother 9840CDW - Color Laser - All-in-One User Manual page 217

r
Put the assembled "FRONT" (1) and
"REAR" (2) cardboard pieces in the
lower carton at the front and rear of the
machine as shown in the illustration.
The foam pads should fit closely to the
machine to support it.
1
s
Place the upper carton (1) over the
machine and the lower carton. Match
the joint holes (2) of the upper carton to
the joint holes (3) of the lower carton.
Troubleshooting and routine maintenance
t
Put the two styrofoam pieces for the
toner cartridges on the top of the
machine. Match the right side of the
machine to the "RIGHT" mark on one of
the styrofoam pieces, and the left side of
the machine to the "LEFT" mark on the
other styrofoam piece. Put the toner
cartridges in the styrofoam.
2
u
Put the carton tray (1) on the top. Match
the front side of the machine to the
marks on the carton tray.
Place the waste toner box in the right
side of the carton tray.
1
2
C
1
201