Configuring S/Pdif Out - Gigabyte GA-780T-USB3 User Manual

5-2-2 Configuring S/PDIF Out

The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio
quality.
1. Connecting a S/PDIF Out Cable:
Connect a S/PDIF coaxial cable or a S/PDIF optical cable (either one) to the corresponding S/PDIF out con-
nector as shown below and an external decoder for transmitting the S/PDIF digital audio signals.
Connects to a S/PDIF optical cable
Connects to a S/PDIF coaxial cable
2. Configuring S/PDIF Out:
On the Digital Output(Optical) screen
bit depth. Click OK to complete.
Enter the Digital Output(Optical) screen to configure further settings if you use the S/PDIF Out
(Note)
connector on the back panel for digital audio output or enter the Digital Output screen if you use
the internal S/PDIF Out connector (SPDIF_OUT) for digital audio output.
, click the Default Format tab and then select the sample rate and
(Note)
- 83 - Appendix