Placement Direction; Screw Holes - Asus M2N-VM DVI User Manual

1.5.2

Placement direction

When installing the motherboard, ensure that you place it into the chassis in
the correct orientation. The edge with external ports goes to the rear part of the
chassis as indicated in the image below.
1.5.3

Screw holes

Place six (6) screws into the holes indicated by circles to secure the
motherboard to the chassis.
Do not overtighten the screws! Doing so can damage the motherboard.
Place this side towards
the rear of the chassis
1-8
R
M2N-CM DVI
Chapter 1: Product introduction