Gigabyte G1.Sniper2 User Manual page 57

Current CPU Temperature
Displays current CPU temperature.
Current System1 Temp./System2 Temp./System3 Temp./System4 Temp.
Displays current system temperatures detected by each system temperature sensor on the motherboard.
Current CPU FAN/FAN1/FAN2/FAN3/FAN4 Speed (RPM)
Displays current CPU/system/power fan speed.
CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold,
BIOS will emit warning sound. Options are: Disabled (default), 60
90 C/194 F.
o o
CPU FAN/FAN1/FAN3 Fail Warning
Allows the system to emit warning sound if the CPU/system fan is not connected or fails. Check the fan
condition or fan connection when this occurs. (Default: Disabled)
CPU Smart FAN Control
Allows you to determine whether to enable the CPU fan speed control function and adjust the fan speed.
Normal Allows the CPU fan to run at different speeds according to the CPU temperature. You can
adjust the fan speed with EasyTune based on your system requirements. (Default)
Silent Allows the CPU fan to run at slow speeds.
Allows you to control the CPU fan speed under the Slope PWM item.
Manual
Disabled Allows the CPU fan to run at full speeds.
Slope PWM
Allows you to control the CPU fan speed. This item is configurable only when CPU Smart FAN Con-
trol is set to Manual. Options are: 0.75 PWM value /
C/140 F, 70
o o
C ~ 2.50 PWM value /
o o
- 57 -
C/158 F, 80 C/176 F,
o o o o
C.
BIOS Setup