Gigabyte G1.Sniper2 User Manual page 46

>>> CPU
Multi-Steps Load-Line
Enables or disables Load-Line Calibration. This item allows you to adjust Vdroop at different levels. En-
abling Load-Line Calibration may keep the CPU voltage more constant under light and heavy CPU load.
Disabled Disables Load-Line Calibration and sets VDroop following Intel specifications.
(Default)
Level 1~Level 10 Enables Load-Line Calibration and adjusts VDroop by ten levels.
CPU Vcore
The default is Auto.
Dynamic Vcore(DVID)
This option is configurable only when CPU Vcore is set to Normal. The default is Auto.
QPI/Vtt Voltage
The default is Auto.
System Agent Voltage
The default is Auto.
Graphics Core
The default is Auto.
Graphics DVID
This option is configurable only when Graphics Vcore is set to Normal. The default is Auto.
>>> MCH/ICH
CPU PLL
The default is Auto.
DRAM Voltage
The default is Auto.
DRAM VRef.
The default is Auto.
DRAM Termination
The default is Auto.
Ch-A Data VRef.
The default is Auto.
Ch-B Data VRef.
The default is Auto.
Ch-A Address VRef.
The default is Auto.
Ch-B Address VRef.
The default is Auto.
BIOS Setup - 46 -