Gigabyte G1.Sniper2 User Manual page 27

8) GSATA3_6/7 (SATA 6Gb/s Connectors, Controlled by Marvell 88SE9172 Chip)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device. The Marvell 88SE9172 chip
supports RAID 0 and RAID 1. Refer to Chapter 5, "Configuring SATA Hard Drive(s)," for instructions on
configuring a RAID array.
BUG
RT
A RAID 0 or RAID 1 configuration requires two hard drives.
GSATA3_7
1
7
1
7
GSATA3_6
Please connect the L-shaped end of
the SATA cable to your SATA hard
drive.
- 27 -
Pin No. Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
Hardware Installation