Table of Contents
Advertisement
2.2
Startup Configuration
The Startup Configuration screen contains parameter items that are set up when the computer
starts up.
Boot Display --------------------------- [Auto]
Memory Test --------------------------- [Enabled]
Silent Boot ----------------------------- [Enabled]
System Boot Drive ------------------- [Drive A Then C]
Boot from CD-ROM ------------------ [Enabled]
CardBus Support -------------------- [Enabled ]
USB Function Support ------------- [Disabled]
Press
and
to move the highlight bar; press
parameter. To exit this screen and return to the main screen, press Esc.
The following table describes the parameters in this screen. Settings in boldface are the default
and suggested parameter settings.
Table 2-2
Startup Configuration Parameters
Parameter
Boot Display
Sets the display device (computer LCD and/or
external monitor) to use when the computer
starts (boots) up.
When set to Auto , the computer outputs to the
external monitor if one is connected; otherwise,
the computer outputs to the LCD.
Memory
Runs or skips the memory test.
Test
Silent Boot
Hides or displays the POST (Power-on Self-
Test) screen messages.
System Boot
Sets the startup (boot) sequence of the drives in
Drive
your computer.
For example, when set to Drive A Then C , the
computer searches for a system (bootable)
diskette in drive A first before proceeding with
drive C.
2-4
Startup Configuration
=Move Highlight Bar,
Description
=Change Setting, Esc=Exit
and
to change the setting of the highlighted
Auto
Both
Enabled
Disabled
Enabled
Disabled
Drive A Then C
Drive C Then A
Drive C
Drive A
Setting or Format
Service Guide
Advertisement
Table of Contents
