Table of Contents
Advertisement
2.5
Power Management Settings
The Power Management Settings screen contains parameter items related to power-saving and
power management.
Heuristic Power Management Mode --------
Display Always On ---------------------------------
Hotkey Beep -----------------------------------------
Modem Ring Resume On Indicator ----------
Battery-low Warning Beep ----------------------
Sleep Upon Battery-low -------------------------
Press
and
to move the highlight bar; press
parameter. To exit this screen and return to the main screen, press Esc.
The following table describes the parameters in this screen. Settings in boldface are the default
and suggested parameter settings.
Table 2-5
Power Management Settings
Parameter
Heuristic
Enables or disables heuristic power
Power
management mode.
Managemen
For more information on power management
t Mode
modes, see section 2.2.1.
Display
When enabled the computer does not enter
Always On
display standby mode.
Note: Always enable this parameter when
playing VCDs (Video Compact Disc). If not, the
system will enter standby mode after 30 minutes
and the screen will go blank.
Hotkey Beep
When enabled the computer gives out a "beep"
sound every time you use a hotkey.
For more information on Hotkeys, see section
1.4.1.
Modem Ring
When enabled, and an incoming modem ring is
Resume On
detected, the computer wakes up from standby
Indicator
mode. When the computer is off or in
hibernation mode, the computer will not resume
on a modem ring.
2-10
Power Management Settings
=Move Highlight Bar,
Description
=Change Setting, Esc=Exit
and
to change the setting of the highlighted
Enabled
Disabled
Disabled
Enabled
Enabled
Disabled
Enabled
Disabled
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Setting or Format
Service Guide
Advertisement
Table of Contents
