Startup Configuration - Acer TravelMate C100 Service Manual

Startup Configuration

The Startup Configuration screen contains parameter values that define how your computer behaves on
system startup.
The following table describes the parameters in this screen. Settings in boldface are the default and
suggested parameter settings.
Boot Display Boot Display
Boot Display Boot Display
Screen Expansion Screen Expansion
Auto Dim Function Auto Dim Function
Resume On LAN/Modem Access [Enabled] / [Disabled] Resume On LAN/Modem Access [Enabled] / [Disabled]
Hotkey Beep Hotkey Beep
Fast Boot Fast Boot
Network Device Network Device
Boot on LAN Boot on LAN
1394 Legacy Mode 1394 Legacy Mode
Boot Drive Sequence Boot Drive Sequence
Intel® SpeedStep™ Technology Intel® SpeedStep™ Technology Intel® SpeedStep™ Technology Intel® SpeedStep™ Technology
= Move highlight bar, = Move highlight bar, = Move highlight bar, = Move highlight bar,
The following table describes the parameters in this screen. Settings in boldface are the default and
suggested parameter settings
Parameter
Boot Display
Screen Expansion
Auto Dim Function
Resume on LAN/Modem
Access
Chapter 2
Startup Configuration Startup Configuration Startup Configuration Startup Configuration
1 1 1 1
nd nd nd nd
2 2 2 2 st st st st
rd rd rd rd
3 3 3 3
th th th th
4 4 4 4
Sets the display device on boot-up.
When set to Auto, the computer automatically
determines the display device. If an external
display device (eg. monitor) is connected, it
becomes the boot display. When set to Both, the
computer outputs to both the LCD and the external
display if one is connected.
Expand the screen on the graphic/text mode.
When it is disabled, the graphic/text mode
expansion function is disabled and the graphic/text
image will be centralized on the LCD. If it is
enabled, the graphic/text image will be expanded to
the full LCD screen.
When enabled, the system supports an automatic
dimming of the LCD back light, when the AC power
source is not available.
When enabled, the computer will wake up from
sleep state if any LAN access to it occurs.
Page 1/1 Page 1/1 Page 1/1 Page 1/1
[Both] / [Auto] [Both] / [Auto]
[Enabled] / [Disabled] [Enabled] / [Disabled]
[Enabled] / [Disabled] [Enabled] / [Disabled]
[Enabled] / [Disabled] [Enabled] / [Disabled]
[Enabled] / [Disabled] [Enabled] / [Disabled]
[Ethernet] / [Wireless] [Ethernet] / [Wireless]
[Enabled] / [Disabled] [Enabled] / [Disabled]
[Enabled] / [Disabled] [Enabled] / [Disabled]
[Enabled] / [Disabled] [Enabled] / [Disabled]
[Floppy] [Floppy] [Floppy] [Floppy]
[CD-ROM] [CD-ROM] [CD-ROM] [CD-ROM]
[Hard Disk] [Hard Disk] [Hard Disk] [Hard Disk]
[LANDesk ® Service Agent] [LANDesk ® Service Agent] [LANDesk ® Service Agent] [LANDesk ® Service Agent]
[Automatic] / [Maximum Performance] / [Battery [Automatic] / [Maximum Performance] / [Battery [Automatic] / [Maximum Performance] / [Battery [Automatic] / [Maximum Performance] / [Battery
Optimized] Optimized] Optimized] Optimized]
= Change setting, = Change setting, = Change setting, = Change setting,
Description
F1 = Help F1 = Help F1 = Help F1 = Help
Options
Both or Auto
Enabled or Disabled
Enabled or Disabled
Enabled or Disabled
35