Panel Settings; Tray Settings - Dell 2130cn - Color Laser Printer User Manual

The LF command is added.
Add-LF
CR=CR-LF, LF=LF, FF=FF
The CR command is added.
Add-CR
CR=CR, LF=CR-LF, FF=CR-FF
The CR and LF commands are added.
CR-XX
CR=CR-LF, LF=CR-LF, FF=CR-FF
Default Color
Purpose:
To specify the color mode to Color or Black. This setting is used for a print job which does not specify a print mode.
Value:
Black* Prints in the black and white mode.
Color Prints in the color mode.

Panel Settings

Use the Panel Settings menu to set a password to limit access to the menus. This prevents items from being changed accidentally.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
See also:
"Setting Panel Lock"
Panel Lock
Purpose:
To limit access to the menus.
Values:
Disable* Does not limit access to the menus.
Enable Limits access to the menus.
Change Password
Purpose:
To set a password to limit access to the menus.
Values:
0000*
Sets or changes the password required to access Admin Menu.
0000-9999
NOTE: This item is only displayed when Panel Lock is set to Enable.
Tray Settings
Use the Tray Settings menu to define the print media loaded in the standard 250-sheet tray or optional 250-sheet feeder.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Display Popup
Purpose:
To specify whether or not to display a popup menu when paper is loaded in the standard 250-sheet tray or optional 250-sheet feeder.
Values: