Dell 2130cn - Color Laser Printer User Manual page 178

7. Reconnect all cables including the power cable into the back of the printer and turn on the printer.
8. Print a printer settings page to verify that the network protocol adapter is installed correctly.
When Using the Operator Panel
a. Press Menu button.
b. Press button until Report/List appears, and then press
c. Printer Setting is displayed. Press
The printer settings page is printed.
d. Verify Network Protocol Adapter is listed in the printer settings under Printer Options.
If it is not listed, turn off the printer, unplug the power cable, and reinstall the network protocol adapter.
When Using the Tool Box
a. Click start® All Programs® Dell Printers® Dell 2130cn Color Laser Printer® Tool Box.
The Select Printer dialog box opens.
b. Click the name of this printer listed in Printer Name, and then click OK.
The Tool Box opens.
c. Click the Printer Settings Report tab.
d. Select Reports from the list at the left side of the page.
The Reports page is displayed.
e. Click the Printer Settings button.
The printer settings page is printed.
f. Verify Network Protocol Adapter is listed in the printer settings under Printer Options.
If it is not listed, turn off the printer, unplug the power cable, and reinstall the network protocol adapter.
Installing and Configuring the Wireless Printer Adapter
The wireless printer adapter allows you to use the printer with wireless network connection.
The specifications of wireless printer adapter are described below.
Item Specification
Connectivity Wireless
Technology
Compliant Standards 802.11b/ 802.11g
Bandwidth 2.4 GHz
Data Transfer Rate 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11b: 11, 5.5, 2, 1 Mbps
Security 64 (40-bit key)/ 128 (104- bit key) WEP, WPA- PSK (TKIP, AES),
WPA2-PSK (AES)
(IEEE802.1x attestation function of WPA 1x non-corresponds)
NOTE: When the Wireless Printer Adapter is installed, you cannot use IEEE 802.1x authentication and /or the Ethernet port for a wired connection.
(Set) button.
(Set) button.