Replacing The Camera Module - Dell I15N-2727BK Owner's Manual

1
1 display cover
3 camera module

Replacing the Camera Module

1 Follow the instructions in "Before You Begin" on page 9.
2 Connect the camera cable to the connector on the camera module.
3 Use the alignment posts on the display cover to snap the camera module
into position.
4 Replace the display bezel. See "Replacing the Display Bezel" on page 60.
5 Replace the display assembly. See "Replacing the Display Assembly" on
page 58.
6 Replace the hinge cover. See "Replacing the Hinge Cover" on page 53.
7 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest
Assembly" on page 32.
8 Replace the battery. See "Replacing the Battery" on page 14.
CAUTION:
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
66
Camera Module
4
3
2
Before turning on the computer, replace all screws and ensure that no
2 tabs (2)
4 camera cable